US Fasteners, 5/16" |
|
|---|---|
Sheet metal screwsScrews with large threads for use in sheet metal sometimes also used in plastic, fiberglass or wood. |
Hex boltsBolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. Also known as hex cap screws or machine bolts. |
Flange boltsFlange bolts have a flange on the bottom of the head that distributes the load like a washer. |
Machine screwsScrews with machine threads for use with a nut or in a tapped hole. |
Carriage bolts & Plow boltsBolts with no drive and machine threads for use with a nut. |
Lag boltsLarge wood screws technically called lag screws. |
Socket screwsScrews with an Allen wrench drive. |
Set screwsScrews with no head and machine threads for use in a tapped hole. |
NutsNuts have internal machine threads, for use with machine thread bolts and screws. |
Studs, Rod & StockStuds, threaded rod, unthreaded rod and keystock for industrial, machining and manufacturing applications. |
Hanger bolts & Dowel screwsHanger bolts and dowel screws are used for adding an external machine or screw thread to wood applications. |
Anchoring productsFasteners for anchoring in stone, concrete, brick and drywall, etc. |
Eye bolts & Screw eyesBolts or screws with a circular ring on the head. |
U-BoltsU shaped bolts with machine threads for use with a nut on both ends. |
J-Bolts w/ nutsJ shaped bolts with machine threads for use with a nut. |
ShacklesShackles are used for a wide range of lifting and pulling applications. |
TurnbucklesAn internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension. |
Threaded inserts & Rivet nutsFor adding a machine thread to material that otherwise cannot be tapped. |
Elevator boltsBolts with a very large flat head and machine threads for use with a nut. |
Thumb screwsProvides a grip for where hand loosening or tightening is needed. Commonly used in applications such as access panels and where frequent adjustment is required. |
Pins & ClipsPins and clips are used to secure or align fasteners or parts on machinery. |
|
Associated Products, 5/16" |
|
|---|---|
Taps & DiesTaps & Dies are tools used to create threads in metal applications. |
Rivet nut installation toolsVarious hand tools and accessories for installing rivet nuts. |