-
Filters:
- 20
- Remove All
US Fasteners, 20
-
Sheet metal screws
Screws with large threads for use in sheet metal sometimes also used in plastic, fiberglass or wood.
-
Hex bolts
Bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. Also known as hex cap screws or machine bolts.
-
Flange bolts
Flange bolts have a flange on the bottom of the head that distributes the load like a washer.
-
Machine screws
Screws with machine threads for use with a nut or in a tapped hole.
-
Carriage bolts & Plow bolts
Bolts with no drive and machine threads for use with a nut.
-
Drywall screws
Construction screws intended for fastening drywall sheets to studs.
-
Socket screws
Screws with an Allen wrench drive.
-
Set screws
Screws with no head and machine threads for use in a tapped hole.
-
Nuts
Nuts have internal machine threads, for use with machine thread bolts and screws.
-
Studs, Rod & Stock
Studs, threaded rod, unthreaded rod and keystock for industrial, machining and manufacturing applications.
-
Hanger bolts & Dowel screws
Hanger bolts and dowel screws are used for adding an external machine or screw thread to wood applications.
-
Furniture hardware
Fasteners commonly used in furniture such as connector bolts, barrel nuts and cam locks.
-
Anchoring products
Fasteners for anchoring in stone, concrete, brick and drywall, etc.
-
Eye bolts & Screw eyes
Bolts or screws with a circular ring on the head.
-
U-Bolts
U shaped bolts with machine threads for use with a nut on both ends.
-
J-Bolts w/ nuts
J shaped bolts with machine threads for use with a nut.
-
Turnbuckles
An internally threaded sleeve intended for assembly with a threaded stud, eye, hook or jaw at each end used for applying and regulating tension.
-
Spacers & Standoffs
Spacers are unthreaded sleeves that fit over bolts or screws to maintain space between components. Standoffs are used to separate and support parts, commonly in electronic assemblies or hardware setups.
-
Threaded inserts & Rivet nuts
For adding a machine thread to material that otherwise cannot be tapped.
-
Sex bolts & Mating screws
Sex bolts resemble machine screws, but with internal threads, and can be used with either specialized mating screws or standard machine screws. Also known as barrel nuts and Chicago bolts.
-
Shoulder bolts
Screws with an unthreaded shoulder that is larger in diameter than the threads. Also known as stripper bolts.
-
Elevator bolts
Bolts with a very large flat head and machine threads for use with a nut.
-
Thumb screws
Provides a grip for where hand loosening or tightening is needed. Commonly used in applications such as access panels and where frequent adjustment is required.
Associated Products, 20
-
Taps & Dies
Taps & Dies are tools used to create threads in metal applications.
-
Rivet nut installation tools
Various hand tools and accessories for installing rivet nuts.