Machine screws, Zinc plated steel, Coarse (standard) thread, #4 x 1"

Machine screws, Zinc plated steel, Coarse (standard) thread, #4 x 1"
Phillips pan head Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a Phillips screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details	Phillips flat head Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a Phillips screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details
Slotted round head Round heads are domed and look like half of a sphere. Slotted drive has a simple slot for a flat bladed screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details

Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a Phillips screw driver.

Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a Phillips screw driver.

Round heads are domed and look like half of a sphere. Slotted drive has a simple slot for a flat bladed screw driver.

Matching Products

Click on a product # for additional info

Prod. #	Description	Buy
9193	Hex nylon insert lock nuts, Zinc plated steel, #4-40 A hex nut with a nylon ring to resist loosening.	Add $0.11 / ea $3.92 / 100 $31.40 / 1,000
4282	SAE flat washers, Zinc plated steel, #4 SAE pattern is a tighter fit on the bolt and a smaller outside diameter.	Add $0.05 / ea $1.46 / 100 $12.40 / 1,000
2599	Lock washers, Zinc plated steel, #4 Split lock washers place tension against a nut after tightening, to help prevent loosening.	Add $0.07 / ea $1.60 / 100 $13.60 / 1,000