Filters: Flat Steel Zinc #12 24 2" Remove All

Machine screws, Flat, Zinc plated steel, #12-24 x 2"

Machine screws, Flat, Zinc plated steel, #12-24 x 2"
Phillips flat head Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a Phillips screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details	Slotted flat head Flat heads are countersunk (cone shaped under the head) with a flat top. Slotted drive has a simple slot for a flat bladed screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details

Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a Phillips screw driver.

Flat heads are countersunk (cone shaped under the head) with a flat top. Slotted drive has a simple slot for a flat bladed screw driver.

Matching Products

Click on a product # for additional info

Prod. #	Description	Buy
2647	Hex machine screw nuts, Zinc plated steel, #12-24 A hex nut in smaller sizes for machine screw diameters under 1/4".	Add $0.07 / ea $3.50 / 100 $28.00 / 1,000
20576	Hex nylon insert lock nuts, Zinc plated steel, #12-24 A hex nut with a nylon ring to resist loosening.	Add $0.12 / ea $4.85 / 100 $43.40 / 1,000
4283	SAE flat washers, Zinc plated steel, #12 SAE pattern is a tighter fit on the bolt and a smaller outside diameter.	Add $0.05 / ea $2.72 / 100 $23.10 / 1,000
4281	Lock washers, Zinc plated steel, #12 Split lock washers place tension against a nut after tightening, to help prevent loosening.	Add $0.08 / ea $2.38 / 100 $19.60 / 1,000