Machine screws, Zinc plated steel, #8-32 x 1/4"

Machine screws, Zinc plated steel, #8-32 x 1/4"
Phillips pan head Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a Phillips screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details	Phillips flat head Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a Phillips screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details
Slotted flat head Flat heads are countersunk (cone shaped under the head) with a flat top. Slotted drive has a simple slot for a flat bladed screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details	Slotted round head Round heads are domed and look like half of a sphere. Slotted drive has a simple slot for a flat bladed screw driver. Zinc plated steel A low carbon steel for general use. Zinc plated for moderate corrosion resistance. Show Details Hide Details

Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a Phillips screw driver.

Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is x-shaped for installation with a Phillips screw driver.

Flat heads are countersunk (cone shaped under the head) with a flat top. Slotted drive has a simple slot for a flat bladed screw driver.

Round heads are domed and look like half of a sphere. Slotted drive has a simple slot for a flat bladed screw driver.

Matching Products

Click on a product # for additional info

Prod. #	Description	Buy
2644	Hex machine screw nuts, Zinc plated steel, #8-32 A hex nut in smaller sizes for machine screw diameters under 1/4".	Add $0.07 / ea $2.00 / 100 $16.00 / 1,000
2621	Hex nylon insert lock nuts, Zinc plated steel, #8-32 A hex nut with a nylon ring to resist loosening.	Add $0.11 / ea $4.22 / 100 $35.00 / 1,000
2974	SAE flat washers, Zinc plated steel, #8 SAE pattern is a tighter fit on the bolt and a smaller outside diameter.	Add $0.05 / ea $1.75 / 100 $14.80 / 1,000
3021	Lock washers, Zinc plated steel, #8 Split lock washers place tension against a nut after tightening, to help prevent loosening.	Add $0.07 / ea $1.71 / 100 $14.30 / 1,000