Washers, Steel, 1/4"
![Washer](images/catalog/flat-washer.png)
Washers are used to spread the load of a bolt or screw over a larger area or to help prevent loosening under vibration.
Washers, Steel, 1/4" |
|
---|---|
![]() USS flat washersUSS pattern is the most common type of flat washer. |
![]() SAE flat washersSAE pattern is a tighter fit on the bolt and a smaller outside diameter. |
![]() Fender washersWashers with oversized outside diameters. |
![]() Lock washersSplit lock washers place tension against a nut after tightening, to help prevent loosening. |
![]() Nord-Lock® washersA lock washer system that uses wedge locking technology to prevent loosening under severe vibration and dynamic load. |
![]() Lock washers external toothUses external teeth to help prevent loosening. |
![]() Lock washers internal toothUses internal teeth to help prevent loosening. |
![]() Bonded sealing washersA neoprene washer bonded to a slightly conical metal backing. Used to seal out air/water or dampen noise and vibration. |
![]() Square channel washersSquare washers designed to be used with 1-5/8" strut channel. |